No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Network Management and Monitoring

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring the Function of Aggregating Site Visitor Traffic on an Interface

(Optional) Configuring the Function of Aggregating Site Visitor Traffic on an Interface

Context

You can enable the function of aggregating site visitor traffic on an interface and report uplink and downlink data on the interface to the Agile Controller.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run interface interface-type interface-number

    The interface view is displayed.

  3. Run ip netstream aggregation enable

    The function of aggregating site visitor traffic is enabled on an interface.

    By default, the function of aggregating site visitor traffic is disabled on an interface.

Translation
Download
Updated: 2019-05-17

Document ID: EDOC1000174072

Views: 100499

Downloads: 332

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next