No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - Network Management and Monitoring

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling the NQA Alarm Function

Enabling the NQA Alarm Function


After the NQA alarm function is enabled, the device sends alarms to the NMS.


  1. Run system-view

    The system view is displayed.

  2. Run snmp-agent trap enable feature-name nqa [ trap-name { nqaresultsprobefailed | nqahttpstatsprobefailed | pingprobefailed | nqaftpstatsprobefailed | pingtestfailed | pingtestcompleted | traceroutetestfailed | traceroutetestcompleted | nqaresultstestfailed | nqaresultstestcompleted | nqaresultsthresholdnotification | nqahttpstatstestfailed | nqahttpstatstestcompleted | nqahttpstatsthresholdnotification | nqaftpstatstestfailed | nqaftpstatstestcompleted | nqaftpstatsthresholdnotification | nqajitterstatstestfailed | nqajitterstatstestcompleted | nqajitterstatsrtdthresholdnotification | nqajitterstatsowdthresholdnotificationsd | nqajitterstatsowdthresholdnotificationds | nqarisingalarmnotification | nqafaillingalarmnotification | nqaftpsaverecordnotification | nqajitterstatsjitterthresholdnotificationsd | nqajitterstatsjitterthresholdnotificationds | nqareflectorstatechangenotification | nqaResultsTestResultChange } ]

    The alarm function is enabled for the NQA module.

    By default, the alarm function is enabled for the NQA module.

Updated: 2019-05-17

Document ID: EDOC1000174072

Views: 108043

Downloads: 346

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next