No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Network Management and Monitoring

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Configuration

Verifying the Configuration

Procedure

  • Run the display rmon2 protocoldirtable command to view information about the protocol directory table.
  • Run the display rmon2 hlhostcontroltable [ index ctrl-index ] [ verbose ] command to view information about the host control table.
  • Run the display rmon2 nlhosttable [ hostcontrolindex ctrl-index ] [ hostaddress ip-address ] command to view information about the host table.
Translation
Download
Updated: 2019-05-17

Document ID: EDOC1000174072

Views: 110554

Downloads: 348

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next