No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - Network Management and Monitoring

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Summary of NQA Configuration Tasks

Summary of NQA Configuration Tasks

Configuring Basic NQA Test Functions

You can perform an NQA test by Configuring an NQA Test Instance and Scheduling an NQA Test Instance.

Configuring Extended NQA Test Functions

The following extended NQA functions are optional in NQA configuration:

Supporting Third-Party NQA Tests

You can enable the device to respond to UDP-Echo packets sent by a third-party device or NMS by Configuring the Response to UDP Tests Initiated by a Third-party Device or NMS Software.

Updated: 2019-05-17

Document ID: EDOC1000174072

Views: 108878

Downloads: 346

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next