No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - Network Management and Monitoring

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Configuration

Verifying the Configuration


The NQA upper and lower alarm thresholds have been configured.


  • Run the display nqa-event command to check the maximum number of events that can be configured and the number of events that have been configured.
  • Run the display nqa event command to check the events associated with the NQA alarm.
  • Run the display nqa alarm command to check alarms of the NQA test instance.
  • Run the display nqa-agent [ admin-name test-name ] [ verbose ] command to check the status and configuration of the test instance configured on the NQA client.
  • Run the display nqa-alarm command in the NQA view to check the maximum number of alarms and current alarms of an NQA test instance.
Updated: 2019-05-17

Document ID: EDOC1000174072

Views: 122587

Downloads: 372

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next