No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - Network Management and Monitoring

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Two-Way Transmission Delay Threshold

Configuring the Two-Way Transmission Delay Threshold


If the two-way transmission delay threshold is configured for an NQA test instance, the statistics about the test packets that exceed the threshold are displayed in the test result. This provides a basis for the network administrators to analyze the operating status of the specified service.


This two-way transmission delay refers to the round-trip transmission delay.


  1. Run system-view

    The system view is displayed.

  2. Run nqa test-instance admin-name test-name

    The NQA view is displayed.

  3. Run threshold rtd rtd-value

    The two-way transmission delay threshold is configured.

    By default, no two-way transmission delay threshold is configured.

Updated: 2019-05-17

Document ID: EDOC1000174072

Views: 100399

Downloads: 332

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next