No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - Network Management and Monitoring

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring the Aging Time

(Optional) Configuring the Aging Time


If a statistics record is not updated within the aging time, the record is aged out and deleted. By using the aging time, IP accounting can delete unneeded statistics records, which may make the statistics inaccurate.


  1. Run system-view

    The system view is displayed.

  2. Run ip accounting timeout time-value

    The aging time is set.

    By default, the aging time of IP accounting statistics records is 720 minutes (12 hours).

    The aging time only applies to the matched and mismatched tables of common IP accounting. The records in the statistics table of IP precedence accounting will never be aged out, and must be deleted manually using the reset ip accounting precedence command.

Updated: 2019-05-17

Document ID: EDOC1000174072

Views: 108984

Downloads: 346

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next