No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Network Management and Monitoring

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the NQA Client to Send Traps When the Transmission Delay Exceeds the Threshold

Configuring the NQA Client to Send Traps When the Transmission Delay Exceeds the Threshold

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run nqa test-instance admin-name test-name

    The NQA view is displayed.

  3. Run send-trap { owd-ds | owd-sd | rtd }*

    The NQA client is configured to send traps when the transmission delay exceeds the threshold.

    By default, the NQA client sends no trap when the transmission delay exceeds the threshold.

    NOTE:
    Parameters owd-ds and owd-sd can be configured only for jitter test instances.

Translation
Download
Updated: 2019-05-17

Document ID: EDOC1000174072

Views: 103693

Downloads: 343

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next