No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Network Management and Monitoring

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Example for Connecting AR routers to Controller Through USB-based Deployment

Example for Connecting AR routers to Controller Through USB-based Deployment

Networking Requirements

On a network with complex topology and high-density devices, you can use a controller to manage network devices.

In Figure 15-8, the controller is deployed on the server, the AR routers are located on the user network, and the AR routers and controller can communicate with each other. The AR routers are deployed using the USB flash drive. The connections between AR routers and controller are implemented during USB-based deployment.
Figure 15-8  AR routers communicate with the controller using USB-based deployment

Configuration Roadmap

The configuration roadmap is as follows:

  1. Make the index file for USB-based deployment to obtain controller information.
  2. Add AR routers to the controller.
  3. On the controller, check the connection status between AR routers and controller.

Procedure

  1. Configure USB-based deployment to obtain controller information.For details, see Example for Configuring USB-based Deployment in the Huawei AR Series Access Routers Configuration Guide - Basic Configuration.

    Add controller information to the index file, including:
    • Controller's IP address/domain name: CONTROTER_IP=10.1.2.1
    • Port number matching the controller's IP address/domain name: CONTROTER_PORT=4999

  2. Add the AR routers to the controller.

    1. Log in to the controller using an administrator account.
    2. Choose Resource > Device in the main menu.
    3. In the navigation tree, choose Device.
    4. Click Add Device and enter the ESN (21500102222SF1900004), as shown in Figure 15-9.
      Figure 15-9  Add Device

  3. Verify the configuration.

    1. Log in to the controller using an administrator account.
    2. Choose Resource > Device in the main menu.
    3. In the navigation tree, choose Device.
    4. On the Device page, the device status is normal, indicating that the AR router has successfully connected to the controller, as shown in Figure 15-10.
      Figure 15-10  Displaying device status

Translation
Download
Updated: 2019-05-17

Document ID: EDOC1000174072

Views: 100811

Downloads: 333

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next