No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Network Management and Monitoring

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring TWAMP Light

Configuring TWAMP Light

Pre-configuration Tasks

Before configuring TWAMP Light, complete the following tasks:

  • Ensure that the devices on the network support TWAMP Light.
  • Ensure that the route between controller and responder is reachable and the IP link works normally.
Translation
Download
Updated: 2019-05-17

Document ID: EDOC1000174072

Views: 100309

Downloads: 332

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next