No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - Network Management and Monitoring

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
NetStream Flows

NetStream Flows

NetStream provides packet statistics based on flows and supports statistics about IP packets (including UDP, TCP, and ICMP packets).

  • For IPv4 packets, IPv4 NetStream defines a flow based on the destination IP address, source IP address, destination port number, source port number, protocol number, ToS, and inbound or outbound interface. Packets with the same information for all seven parameters (known as 7–tuple information) are marked as one flow.
Updated: 2019-05-17

Document ID: EDOC1000174072

Views: 109395

Downloads: 346

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next