No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - Network Management and Monitoring

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Configuration

Verifying the Configuration


All the CWMP configurations are complete.


  • Run the display cwmp configuration command to check CWMP configurations on the router.
  • Run the display cwmp password command to check CWMP password on the router.
  • Run the display cwmp status command to check CWMP status on the router.
  • Run the display cwmp request upload status command to check the status of configuration file uploading from the router to the ACS.
Updated: 2019-05-17

Document ID: EDOC1000174072

Views: 101861

Downloads: 337

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next