No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - Network Management and Monitoring

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Transmission and Reception Mechanisms

Transmission and Reception Mechanisms

LLDP frame transmission

After LLDP is enabled on a device, the device periodically sends LLDP frames to neighbors. When the local configuration changes, the device sends LLDP frames to notify neighbors of the changes. To reduce the number of LLDP frames sent when the local information changes frequently, the device waits for a period before sending the next LLDP frame.

LLDP frame reception

An LLDP-capable device checks the validity of received LLDP frames and the TLVs in those frames. When determining that an LLDP frame and its TLVs are valid, the local device saves neighbor information and sets the aging time of neighbor information on the local device to the TTL value carried in the received LLDPDU. If the TTL value carried in the received LLDPDU is 0, the neighbor information ages out immediately.

Updated: 2019-05-17

Document ID: EDOC1000174072

Views: 108206

Downloads: 346

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next