No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Network Management and Monitoring

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking Test Results

Checking Test Results

Prerequisites

An NQA test instance has been configured and the NQA test has been completed.

NOTE:
  • If the display command is executed in the NQA view with no test instance name specified, only the test results of the current instance are displayed. If the display command is executed in the system or other views other than the NQA view with no test instance view specified, test results of all test instances are displayed. If a test instance is specified, only the test result of this test instance is displayed.
  • The display nqa results command displays the test results of only the test instances that have been completed.
  • The display nqa results collection command displays accumulative results of all test instances. Only the jitter tests support the query of accumulative results.
  • Failed Jitter tests are not recorded in the historical records.

Procedure

  • Run the display nqa results [ collection | success | failed ] [ test-instance admin-name test-name ] command to check NQA test results.
  • Run the display nqa history [ test-instance admin-name test-name ] [ from start-date start-time to end-date end-time ] command to check the historical records of NQA test instances.
Translation
Download
Updated: 2019-05-17

Document ID: EDOC1000174072

Views: 108687

Downloads: 346

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next