No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Network Management and Monitoring

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Default Settings for IP FPM

Default Settings for IP FPM

Table 4-2 lists default settings in IP FPM.
Table 4-2  Default settings for IP FPM

Parameter

Default Setting

On-demand two-way delay measurement for an IP FPM instance

Disabled

Measurement interval for an IP FPM instance

10 seconds

IP FPM instance

Not created

On-demand packet loss measurement interval

10 minutes

on-demand two-way delay measurement interval

10 minutes

On-demand packet loss measurement for an IP FPM instance

Disabled

Global Data Collecting Point (DCP) and Measurement Control Point (MCP) functions

Disabled

UDP port for an MCP to communicate with a DCP in IP FPM statistical system.

65030

Alarm function of the IP FPM module

Closed

Measurement point of an IP FPM instance

Not configured

Alarm description

Empty

Translation
Download
Updated: 2019-05-17

Document ID: EDOC1000174072

Views: 108038

Downloads: 346

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next