- About This Document
- SNMP Configuration
- Overview of SNMP
- Understanding SNMP
- Application Scenarios for SNMP
- Licensing Requirements and Limitations for SNMP
- Summary of SNMP Configuration Tasks
- Default Settings for SNMP
- Configuring a Device to Communicate with an NMS by Running SNMPv1
- Configuring a Device to Communicate with an NMS by Running SNMPv2c
- Configuring a Device to Communicate with an NMS by Running SNMPv3
- Checking SNMP Packet Statistics
- Configuration Examples for SNMP
- Troubleshooting SNMP
- RMON and RMON2 Configuration
- TCP FPM Configuration
- IP FPM Configuration
- CWMP Configuration
- LLDP Configuration
- Overview of LLDP
- Understanding LLDP
- Licensing Requirements and Limitations for LLDP
- Default Settings for LLDP
- Configuring Basic LLDP Functions
- Enabling LLDP
- (Optional) Disabling LLDP on an Interface
- (Optional) Configuring an LLDP Management IP Address
- (Optional) Configuring LLDP Time Parameters
- (Optional) Configuring the Interface Initialization Delay
- (Optional) Configuring the Type of TLVs that an Interface Can Send
- (Optional) Configuring LLDP Packet Authentication on an Interface
- Verifying the Configuration
- Configuring the LLDP Alarm Function
- Maintaining LLDP
- Configuration Examples for LLDP
- FAQ About LLDP
- NQA Configuration
- Overview of NQA
- Understanding NQA
- Test Mechanisms
- NQA Association Mechanism
- Application Scenarios for NQA
- Summary of NQA Configuration Tasks
- Licensing Requirements and Limitations for NQA
- Configuring the Response to UDP Tests Initiated by a Third-party Device or NMS Software
- Configuring an NQA Test Instance
- Configuring a DHCP Test Instance
- Configuring a DNS Test Instance
- Configuring an FTP Download Test Instance
- Configuring an FTP Upload Test Instance
- Configuring an HTTP Test Instance
- Configuring an ICMP Test Instance
- Configuring an ICMP Jitter Test Instance
- Configuring an SNMP Query Test Instance
- Configuring a TCP Test Instance
- Configuring a Trace Test Instance
- Configuring a UDP Test Instance
- Configuring a UDP Jitter Test Instance
- Configuring a Hardware-based UDP Jitter Test Instance
- Configuring the LSP Ping Test
- Configuring the LSP Trace Test
- Verifying the Configuration
- Configuring the NQA Transmission Delay Threshold and Alarm Threshold
- Configuring the Trap Function
- Enabling the NQA Alarm Function
- Configuring the NQA Client to Send Traps When a Test Fails
- Configuring the NQA Client to Send Traps When a Probe Fails
- Configuring Trap Sending Upon Probe Result Changes
- Configuring the NQA Client to Send Traps After a Probe Succeeds
- Configuring the NQA Client to Send Traps When the Transmission Delay Exceeds the Threshold
- Verifying the Configuration
- Configuring the NQA Client to Send Test Results to an FTP Server
- Configuring Parameters for Connecting to an FTP Server
- Enabling the Function of Saving NQA Test Results Through FTP
- (Optional) Configuring File Parameters for Saving Test Results Through FTP
- (Optional) Enabling the NQA Client to Send Traps to the NMS After Test Results Are Sent to the FTP
- Verifying the Configuration
- Scheduling an NQA Test Instance
- Clearing NQA Test Statistics
- Configuration Examples for NQA
- Example for Configuring a DHCP Test Instance
- Example for Configuring a DNS Test Instance
- Example for Configuring an FTP Download Test Instance
- Example for Configuring an FTP Upload Test Instance
- Example for Configuring an HTTP Test Instance
- Example for Configuring an ICMP Test Instance
- Example for Configuring an ICMP Jitter Test
- Example for Configuring an SNMP Query Test Instance
- Example for Configuring a TCP Test Instance
- Example for Configuring a Trace Test Instance
- Example for Configuring a UDP Test Instance
- Example for Configuring a UDP Jitter Test Instance
- Example for Configuring NQA to Check VoIP Service Jitter
- Example for Configuring a Threshold for the NQA Alarm
- Example for Sending Trap Massages to the NMS When the Threshold Is Exceeded
- Example for Configuring Test Results to Be Sent to the FTP Server
- Example for Configuring the LSP Ping Test for a Common Tunnel
- Example for Configuring the LSP Trace Test for the TE Tunnel
- Example for Configuring the LSP Trace Test for Checking the CR-LSP Hotstandby Tunnel
- Troubleshooting NQA
- FAQ About NQA
- LSDP Configuration
- Service Diagnosis Configuration
- Mirroring Configuration
- Packet Capture Configuration
- NetStream Configuration
- Overview of NetStream
- Understanding NetStream
- Application Scenarios for NetStream
- Licensing Requirements and Limitations for NetStream
- Default Settings for NetStream
- Configuring Exporting of IPv4 Unicast Original Flow Statistics
- Configuring IPv4 Multicast Original Flow Statistics Exporting
- Configuring IPv4 Aggregation Flow Statistics Exporting
- Configuring IPv4 Flexible Flow Statistics Exporting
- Configuring Exporting of Statistics about Flows That Fail the RPF Check
- Configuring NetStream Interface Index Length
- (Optional) Configuring the Function of Aggregating Site Visitor Traffic on an Interface
- Clearing NetStream Statistics
- Configuration Examples for NetStream
- IP Accounting Configuration
- TWAMP Light Configuration
- AR and Controller Interconnection Configuration
- Overview of AR and Controller Interconnection Configuration
- Understanding AR and Controller Interconnection Configuration
- Application Scenarios for AR and Controller Interconnection Configuration
- Summary of AR and Controller Interconnection Configuration Tasks
- Licensing Requirements and Limitations for AR and Controller Interconnection
- Connecting an AR to the Controller
- Configuration Examples for AR and Controller Interconnection
- Example for Connecting AR routers to Controller Through Factory Setting
- Example for Connecting AR routers to Controller Through USB-based Deployment
- Example for Connecting AR routers to Controller Through DHCP
- Example for Connecting Routers (without OSP Daughter Card) to Controller
- Example for Connecting Routers (with OSP Daughter Card) to Controller