Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuration Examples for NQA
- Example for Configuring a DHCP Test Instance
- Example for Configuring a DNS Test Instance
- Example for Configuring an FTP Download Test Instance
- Example for Configuring an FTP Upload Test Instance
- Example for Configuring an HTTP Test Instance
- Example for Configuring an ICMP Test Instance
- Example for Configuring an ICMP Jitter Test
- Example for Configuring an SNMP Query Test Instance
- Example for Configuring a TCP Test Instance
- Example for Configuring a Trace Test Instance
- Example for Configuring a UDP Test Instance
- Example for Configuring a UDP Jitter Test Instance
- Example for Configuring NQA to Check VoIP Service Jitter
- Example for Configuring a Threshold for the NQA Alarm
- Example for Sending Trap Massages to the NMS When the Threshold
Is Exceeded
- Example for Configuring Test Results to Be Sent to the FTP
Server
- Example for Configuring the LSP Ping Test for a Common Tunnel
- Example for Configuring the LSP Trace Test for the TE Tunnel
- Example for Configuring the LSP Trace Test for Checking the
CR-LSP Hotstandby Tunnel
Previous
