No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Network Management and Monitoring

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Exporting of Statistics about Flows That Fail the RPF Check

Configuring Exporting of Statistics about Flows That Fail the RPF Check

After the exporting is configured for statistics about flows that fail the RPF check, the NDE collects statistics about flows that fail the RPF check and exports the statistics about each flow to the NetStream server for further analysis.

Pre-configuration Tasks

Before configuring exporting of statistics about flows that fail the RPF check, complete the following tasks:

  • Setting physical parameters of interfaces
  • Setting the link-layer attributes of each interface
Translation
Download
Updated: 2019-05-17

Document ID: EDOC1000174072

Views: 108037

Downloads: 346

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next