No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Network Management and Monitoring

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Adding an AR to the Controller

Adding an AR to the Controller

Prerequisites

The ESN of the AR has been obtained.

Context

The AR's ESN needs to be added to the controller. After the AR goes online and successfully registers, the controller can manage the AR.

Procedure

  1. Log in to the controller using an administrator account.
  2. Choose Resource > Device in the main menu.
  3. In the navigation tree, choose Device.
  4. Click Add Device and enter the ESN, as shown in Figure 15-4.

    Figure 15-4  Add Device

    NOTE:

    To import devices in a batch, click Batch Import on the Add Device page. Download the template.xls file, fill in the device information, and import the file to the controller.

Translation
Download
Updated: 2019-05-17

Document ID: EDOC1000174072

Views: 102747

Downloads: 341

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next