No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Network Management and Monitoring

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring Statistics Table Upper Thresholds

(Optional) Configuring Statistics Table Upper Thresholds

Context

Statistics tables include matched table and mismatched table:
  • Matched table: stores statistics about the packets matching the IP accounting rules.
  • Mismatched table: stores statistics about the packets not matching the IP accounting rules. Additionally, if you do not configure IP accounting rules, all packet statistics of common IP accounting are also recorded in this table.
    NOTE:
    The default upper threshold value is 0, indicating that the table does not store packet statistics. If you need to collect statistics on mismatched IP packets or enable common IP accounting without configuring IP accounting rules, set the mismatched table upper threshold.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Set the upper thresholds as follows:
    • Run the ip accounting matched-threshold thresh-value command to set the matched table upper threshold. The default threshold is 512, indicating that a maximum of 512 can be stored in the matched table.
    • Run the ip accounting mismatched-threshold thresh-value command to set the mismatched table upper threshold. The default threshold is 0, indicating that no record will be stored in the mismatched table.
Translation
Download
Updated: 2019-05-17

Document ID: EDOC1000174072

Views: 110050

Downloads: 348

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next