No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - Network Management and Monitoring

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Versions for Exported Packets

Configuring Versions for Exported Packets


  1. Run the system-view command to enter the system view.
  2. Run the ip netstream export version version [ origin-as | peer-as ] [ bgp-nexthop ] command to set the version and AS option of the exported packets carrying original flow statistics.

    By default, V5 supports the exported packets carrying flow statistics without the AS option. Packets of V5 do not carry BGP next hop information.


    Currently, V9 and V10 support the exported packets carrying BGP next hop information.

Updated: 2019-05-17

Document ID: EDOC1000174072

Views: 101793

Downloads: 335

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next