No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Alarm Handling

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
IPSEC_1. hwIPSecPolicyDel

IPSEC_1. hwIPSecPolicyDel


IPSEC/4/IPSECPOLICYDEL: OID [oid] an IPSec policy is deleted. (SeqNum=[sequence-number], PolicyName=[policy-name], VsysName=[vsys-name])

An IPSec policy is deleted.


Alarm ID Alarm Severity Alarm Type Warning Communications alarm


Name Meaning
oid Indicates the MIB object ID of the alarm.
sequence-number Indicates the number of the IPSec policy.
policy-name Indicates the name of the IPSec policy.


Indicates the name of the virtual system to which the IPSec policy belongs.


The device does not support this parameter.

Impact on the System


Possible Causes

When an IPSec policy is deleted, the alarm is generated.


  • This log message is informational only, and no action is required.
Updated: 2019-05-06

Document ID: EDOC1000174085

Views: 131147

Downloads: 20

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next