No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
WLAN_1.3.6.1.4.1.2011.6.139.2.1.1.18 hwAPStaFullRecoverNotify(for FAT AP)

WLAN_1.3.6.1.4.1.2011.6.139.2.1.1.18 hwAPStaFullRecoverNotify(for FAT AP)

Description

WLAN/4/AP_REACH_MAX_USERS_RESTORE_NOTIFY:OID [oid] AP has the max number of stations notify restore.(APID=[INTEGER], APMAC=[OPAQUE], FailCause=[INTEGER], CurrentNum=[INTEGER])

New stations can be associated with the AP.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.6.139.2.1.1.18 Warning equipmentAlarm(5)

Parameters

Name Meaning
OID Indicates the ID of the MIB object.
APID Indicates the AP ID.
APMAC Indicates the MAC address of an AP.
FailCause Indicates the cause for the station authentication failure.
CurrentNum Indicates the number of stations currently associated with the AP.

Impact on the System

The new stations can go online properly.

Possible Causes

The number of stations is smaller than the maximum number.

Procedure

  1. No action is required.

Related Information

None

Translation
Download
Updated: 2019-05-06

Document ID: EDOC1000174085

Views: 119208

Downloads: 20

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next