Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ENTITYTRAP_1.3.6.1.4.1.2011.5.25.219.2.2.3 hwBoardFail 132154
Description
ENTITYTRAP/2/BOARDFAIL: OID [oid] Board become failure for some reason.(Index=[INTEGER], EntityPhysicalIndex=[INTEGER], PhysicalName="[OCTET]", EntityTrapEntType=[INTEGER], EntityTrapFaultID=132154, EntityTrapReasonDescr="Voice Fault")
Some functions on the board are invalid.
Attribute
| Alarm ID | Alarm Severity | Alarm Type |
|---|---|---|
| 1.3.6.1.4.1.2011.5.25.219.2.2.3 | Major | equipmentAlarm(5) |
Parameters
| Name | Meaning |
|---|---|
| OID | Indicates the MIB object ID of the alarm. |
| Index | Indicates the entity index. |
| EntityPhysicalIndex | Indicates the physical entity index. |
| PhysicalName | Indicates the name of the physical entity. |
| EntityTrapEntType | Indicates the type of the physical entity, such as mpu(1), and lpu(2). |
| EntityTrapFaultID | Indicates the error code. |
| EntityTrapReasonDescr | Indicates the description of the error code. |
Procedure
- Check whether the faulty board is registered successfully and services are running properly.
Run the display device command to check whether the faulty board is registered successfully, and run the display interface counters command to view the statistics on received and sent packets. According to the statistics, check whether services are running properly.
- If the faulty board is registered successfully and services are running properly, no action is required.
- If the faulty board is unregistered or services are not running properly, go to step 2.
- If the faulty board is a main control board, run the reboot command to reboot the device. If the faulty board is an interface board,
run the reset slot command to reset the faulty interface board. Then check whether the device is working properly.
- If the board can be registered successfully and services are running properly, no action is required.
- If the board cannot be registered or services cannot run properly, the board hardware is faulty. Replace this board.
- If the fault persists, go to step 3.
- Collect alarm information and configuration information, and then contact technical support personnel.
Previous
