Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
AMPADP_1.3.6.1.4.1.2011.6.119.4.0.1 hwEponnniOntRogueOntFailAlarmTrap
Description
AMPADP/2/ONT_ROGUE: OID [oid] EPON ONU's optical-module always send laser.
The EPON ONU optical module constantly transmits optical signals.
Attribute
| Alarm ID | Alarm Severity | Alarm Type |
|---|---|---|
| 1.3.6.1.4.1.2011.6.119.4.0.1 | Warning | environmentalAlarm(6) |
Impact on the System
Packet loss occurs on the port where the rogue ONT resides. As a result, the service quality deteriorates and the ONT that has not gone online cannot properly go online.
Possible Causes
Cause 1: A rogue ONT resides on the port, and the rogue ONT does not support Huawei extended PLOAM or cannot enable or disable the transmit power supply of the optical module.
Cause 2: The ONT is faulty. As a result, the ONT is incorrectly detected to continuously generate optical signals.
Previous
