No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Alarm Handling

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



HUAWEI POE/PDDETECTINVALID: Invalid PD connect.(PortIndex=[integer])

The PD connected to the port is invalid.


Alarm ID Alarm Severity Alarm Type
None None None


Name Meaning
PortIndex Indicates the port number.

Impact on the System

The system cannot provide power for the PD connected to the specified port.

Possible Causes

An invalid PD is connected to the port.


  • Replace the invalid PD with a valid PD.

Related Information

Updated: 2019-05-06

Document ID: EDOC1000174085

Views: 130925

Downloads: 20

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next