No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
NAT_1.3.6.1.4.1.2011.5.25.226.1.1 hwNatPacketDiscard

NAT_1.3.6.1.4.1.2011.5.25.226.1.1 hwNatPacketDiscard

Description

NAT/4/NAT_PACKET_DISCARD: OID [oid] Interface [OCTET] had discarded packets, due to lack of mapping space when NAT is out of addresses.

The NAT address pool resources are insufficient. As a result, NAT packet loss event alarm is displayed when packet loss occurs.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.226.1.1 Warning processingErrorAlarm(4)

Parameters

Name Meaning
OID MIB object number
OCTET interface index

Impact on the System

None

Possible Causes

Packet loss occurs because of insufficient NAT address pool resources of the interface index.

Procedure

  • This is a normal notification.

    The trap is generated when the IP addresses referenced by outbound NAT (no-PAT) are insufficient for outbound NAT configuration.

Related Information

None

Translation
Download
Updated: 2019-05-06

Document ID: EDOC1000174085

Views: 117547

Downloads: 19

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next