No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Alarm Handling

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ENTITYTRAP_1. hwStorageInsufficientResume

ENTITYTRAP_1. hwStorageInsufficientResume


ENTITYTRAP/6/STORAGEINSUFFICIENTRESUME:OID [oid] Storage utilization resumed from exceeding the alarm threshold.(Index=[INTEGER], PhysicalName="[OCTET]", StorageName="[OCTET]", ThresholdValue=[INTEGER](KB), CurrentValue=[INTEGER](KB))

The storage space was restored to the normal range.


Alarm ID Alarm Severity Alarm Type Cleared equipmentAlarm(5)


Name Meaning

Indicates the MIB object ID of the alarm.

Index Indicates a physical index.
PhysicalName Indicates an entity name.
StorageName Indicates the storage device name.
ThresholdValue Indicates the alarm threshold.
CurrentValue Indicates the current value.

Impact on the System


Possible Causes

The storage space was cleaned up.


  • This trap is informational only, and no action is required.
Updated: 2019-05-06

Document ID: EDOC1000174085

Views: 115710

Downloads: 19

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next