No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
WLAN_1.3.6.1.4.1.2011.6.139.18.1.1.1.1 hwWlanStaAuthErrorTrap

WLAN_1.3.6.1.4.1.2011.6.139.18.1.1.1.1 hwWlanStaAuthErrorTrap

Description

WLAN/4/STA_AUTH_ERROR: OID [oid] Station author is error notify.(APMAC=[OPAQUE],APMAC=[OPAQUE],RadioID=[INTEGER],StaMac=[OPAQUE],ApName=[OCTET],StaAssocBssid=[OPAQUE],Ssid=[OCTET],StaAuthenticationMode=[INTEGER],StaFailCodeType=[OCTET],StaAuthenticationFailCause=[INTEGER],StaAuthenticationFailCauseStr=[OCTET], APID=[INTEGER])

A STA failed to be authenticated.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.6.139.18.1.1.1.1 Warning equipmentAlarm(5)

Parameters

Name Meaning
OID Indicates the ID of the MIB object.
APMAC Indicates the MAC address of an AP.
RadioID Indicates the radio ID.
StaMac Indicates the MAC address of a STA, which identifies the STA and functions as the index for querying information associated with the STA.
ApName Indicates the AP name.
StaAssocBssid Indicates the BSSID associated with the STA.
Ssid Indicates the SSID associated with the STA.
StaAuthenticationMode Indicates the authentication mode of the STA.
StaFailCodeType

Indicates the code type of failures of STA authentication and association.

  • 1: Reason code
  • 2: Status code
StaAuthenticationFailCause Indicates the index of the authentication failure reason.
StaAuthenticationFailCauseStr Indicates the user authentication failure reason.
APID Indicates the AP ID.

Impact on the System

STAs cannot go online.

Possible Causes

The AP was configured with the WEP shared key authentication mode and the STA sent a connection request with an incorrect password.

Procedure

  1. Check whether the shared key is configured correctly.

    • If so, go to Step 2.
    • If not, this is a common event. Go to step 3.

  2. Collect alarm messages, log messages, and configurations, and then contact the technical support personnel.
  3. End.

Related Information

None.

Translation
Download
Updated: 2019-05-06

Document ID: EDOC1000174085

Views: 132605

Downloads: 20

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next