No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Alarm Handling

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
L2V_1. hwVpwsPwRedundancyDegraded

L2V_1. hwVpwsPwRedundancyDegraded


L2V/2/PWE3_VPWS_DEGRADED_T: OID [OID] VPWS PW redundancy reported a protect degraded alarm. (PrimaryPwId=[GAUGE], PrimaryPwType=[INTEGER], InterfaceIndex=[INTEGER], InterfaceName=[STRING])

VPWS PW redundancy, VLL FRR, or PW-APS protection degraded.


Alarm ID Alarm Severity Alarm Type




Name Meaning


Indicates the MIB object ID of the alarm.


Primary PW ID


Primary PW type


Index of the interface where the PW resides


Interface where the PW resides

Impact on the System

If the primary or secondary PW for VPWS PW redundancy fails, VPWS PW redundancy protection will degrade.

If the primary or secondary PW for VLL FRR fails, VLL FRR protection will degrade.

If the primary or secondary PW for PW-APS fails, PW-APS protection will degrade.

Possible Causes

The primary or secondary PW for VPWS PW redundancy failed.

The primary or secondary PW for VLL FRR failed.

The primary or secondary PW for PW-APS failed.


  1. Perform the troubleshooting operations described in hwPWVcDown to rectify the fault and then check whether the trap is cleared.

    • If trap is cleared, go to step 2.
    • If trap is not cleared, go to step 3.

  2. Collect alarm information and configuration information, and then contact technical support personnel.
  3. End.
Updated: 2019-05-06

Document ID: EDOC1000174085

Views: 122022

Downloads: 20

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next