No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ARP_1.3.6.1.4.1.2011.5.25.123.2.12 hwEthernetARPRemoteBackupFailResumeAlarm

ARP_1.3.6.1.4.1.2011.5.25.123.2.12 hwEthernetARPRemoteBackupFailResumeAlarm

Description

ARP/4/ARP_NO_ACCORD_RESUME_TRAP: OID [OID] The remote ARP entry backup succeed. (Mainif name=[OCTET]).

Remote backup of ARP entries recovered.

Attribute

Alarm ID Alarm Severity Alarm Type

1.3.6.1.4.1.2011.5.25.123.2.12

Warning

qualityOfServiceAlarm(3)

Parameters

Name Meaning

OID

Indicates the MIB object ID of the alarm.

Mainif name

Name of the interface that reported the trap

Impact on the System

None

Possible Causes

The backup device detected that ARP entries were successfully backed up during a period.

Procedure

  1. This trap message is informational only, and no action is required.
Translation
Download
Updated: 2019-05-06

Document ID: EDOC1000174085

Views: 131754

Downloads: 20

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next