No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.66 hwMplsLspTotalCountExceedClear

LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.66 hwMplsLspTotalCountExceedClear

Description

LSPM/2/MPLSLSPTOTALCOUNTEXCEEDCLEAR:OID [oid] The lsp count falls from the upper limit.(hwMplsLspProtocol=[integer])

The total number of LSPs fell below the upper limit.

Attribute

Alarm ID Alarm Severity Alarm Type

1.3.6.1.4.1.2011.5.25.121.2.1.66

Major

qualityOfServiceAlarm(3)

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

hwMplsLspProtocol

LSP protocol type

Impact on the System

None.

Possible Causes

The number of LDP LSPs fell below the upper limit.

Procedure

  1. This trap message is informational only, and no action is required.
Translation
Download
Updated: 2019-05-06

Document ID: EDOC1000174085

Views: 115837

Downloads: 19

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next