No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.12 hwMplsTunnelOBResume

LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.12 hwMplsTunnelOBResume

Description

LSPM/3/MPLSTUNNELOBRESUME:OID [oid] Main LSP of Tunnel resumes from backup LSP in OB.(SessionTunnelId=[integer], LocalLspId=[integer], IngressLsrId=[integer], EgressLsrId=[integer], MplsTunnelAdminStatus=[integer], MplsTunnelOperStatus=[integer])

The trap message was output when the primary CR-LSP went Up and traffic was switched back from the ordinary backup CR-LSP to the primary CR-LSP.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.121.2.1.12

Minor

communicationsAlarm(2)

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

SessionTunnelId

Indicates the ID of the tunnel.

LocalLspId

Indicates the local LSP ID of a tunnel.

IngressLsrId

Indicates the LSR ID of the ingress on the tunnel.

EgressLsrId

Indicates the LSR ID of the egress on the tunnel.

MplsTunnelAdminStatus

Indicates the management status of the tunnel.
  • 1: Up
  • 2: Down

MplsTunnelOperStatus

Indicates the operating status of the tunnel:
  • 1: Up
  • 2: Down

Impact on the System

Services will not be affected.

Possible Causes

When the tunnel was in the OB inuse state, the status of the primary LSP changed from Down to Up.

Procedure

  • This trap message is informational only, and no action is required.
Translation
Download
Updated: 2019-05-06

Document ID: EDOC1000174085

Views: 117160

Downloads: 19

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next