No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Alarm Handling

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
POE_1. hwPoePowerOverUtilizationThreshold

POE_1. hwPoePowerOverUtilizationThreshold


POE/4/PWRUTITHRESH: OID [oid] PSE is overdrawing power.(ConsumingPower=[INTEGER])

The power consumption of a PoE-support board exceeds the alarm threshold.


Alarm ID Alarm Severity Alarm Type Warning qualityOfServiceAlarm(3)


Name Meaning

Indicates the MIB object ID of the alarm.

ConsumingPower Indicates the power consumption of the board.

Impact on the System

If the power consumption of the board is not reduced, the PDs with low priorities may be powered off because of insufficient power supply.

Possible Causes

The total PoE power consumption exceeds the alarm threshold.


  1. Increase priorities of important devices to prevent their power from being occupied.
  2. If the alarm persists, power off some PDs with low priorities to ensure system reliability.
Updated: 2019-05-06

Document ID: EDOC1000174085

Views: 129302

Downloads: 20

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next