No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Alarm Handling

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
DS_1. hwCfgChgNotify

DS_1. hwCfgChgNotify


DS/4/DATASYNC_CFGCHANGE:OID [OID] configurations have been changed. The current change number is [change-number], the change loop count is [loop-count], and the maximum number of records is [max-number].

Configurations on the host have been changed.


Alarm ID Alarm Severity Alarm Type Warning communicationsAlarm(2)


Name Meaning


Indicates the MIB object ID of the alarm.


Sequence number of the current change


Current loop count


Maximum number of entries in the configuration change cache table

Impact on the System

Configurations about services will change.

Possible Causes

Configurations on the host have been changed within a specified period.


  • This log message is informational only, and no action is required.

Related Information


Updated: 2019-05-06

Document ID: EDOC1000174085

Views: 130965

Downloads: 20

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next