No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
L2V_1.3.6.1.4.1.2011.5.25.119.1.2.8 hwVplsVcStatusChange

L2V_1.3.6.1.4.1.2011.5.25.119.1.2.8 hwVplsVcStatusChange

Description

L2V/4/VPLSVC_STATUS_CHANGE_T:OID [OID] The status of the VPLS VC changed. (VsiName=[STRING], PwId=[GAUGE], RemoteIp=[IPADDR], HWL2VpnStateChangeReason=[INTEGER], HWPwState=[INTEGER], HWPwWorkingState=[INTEGER], SysUpTime=[TIMETICK])

The VPLS VC status changes.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.119.1.2.8

Warning

communicationsAlarm(2)

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

VsiName

Indicates the name of a VSI.

PwId

Indicates the ID of a PW.

RemoteIp

Indicates the IP address of the remote peer.

HWL2VpnStateChangeReason

Indicates the cause of the VC status change. For details, refer to hwVplsStateChangeReason in the appendix of HUAWEI-VPLS-EXT-MIB.

HWPwState

Indicates the PW status, which can be:
  • Up
  • Down

HWPwWorkingState

Indicates the PW working status, which can be:
  • Master
  • Backup

SysUpTime

Indicates the time for system startup.

Impact on the System

None

Possible Causes

Cause 1:

The status of the VPLS VC changed from Up to Down.

Cause 2:

The status of the VPLS VC changed from Down to Up.

Cause 3:

The working status of the VPLS VC changed from Master to Backup.

Cause 4:

The working status of the VPLS VC changed from Backup to Master.

Procedure

  • This trap message is informational only, and no action is required.
Translation
Download
Updated: 2019-05-06

Document ID: EDOC1000174085

Views: 118537

Downloads: 19

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next