No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Alarm Handling

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
WLAN_1. hwApTemperatureTooHighRestoreTrap

WLAN_1. hwApTemperatureTooHighRestoreTrap


WLAN/4/AP_TEMPERATURE_NORMAL:OID [oid] The AP's temperature changes to normal. (AP Mac=[OPAQUE], APName=[STRING], Temperature=[INTEGER]°C, APID=[INTEGER])

The AP's temperature is lower than the upper temperature threshold.


Alarm ID Alarm Severity Alarm Type Warning equipmentAlarm(5)


Name Meaning
OID Indicates the ID of the MIB object.
AP Mac Indicates the MAC address of an AP.
APName Indicates the AP name.
Temperature Indicates the temperature of the AP.

When the alarm is triggered on the AP2030DN, AP3030DN, AP4030DN, and AP4130DN, the Temperature parameter indicates the alarm triggering threshold rather than the AP's actual temperature.

APID Indicates the AP ID.

Impact on the System


Possible Causes

The AP's temperature has fallen below the upper temperature threshold.


  1. This alarm message is informational only, and no action is required.
Updated: 2019-05-06

Document ID: EDOC1000174085

Views: 129646

Downloads: 20

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next