No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
L2IFPPI_1.3.6.1.4.1.2011.5.25.160.3.2 hwMflpIfResume

L2IFPPI_1.3.6.1.4.1.2011.5.25.160.3.2 hwMflpIfResume

Description

L2IFPPI/4/MFLPIFRESUME:OID [oid] Loop does not exist in vlan [INTEGER], Interface [OCTET1] resumed, block-time is [GAUGE] for [OCTET2].

The blocked interface where MAC address flapping occurs is recovered.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.160.3.2 Warning equipmentAlarm(5)

Parameters

Name Meaning
oid

Indicates the MIB object ID of the alarm.

INTEGER Indicates the VLAN ID.
OCTET1 Indicates the blocked interface name.
OCTET2 Indicates the interface recovery cause.

Impact on the System

None

Possible Causes

The blocked interface is recovered.

Procedure

  1. This alarm is informational and no action is required.
Translation
Download
Updated: 2019-05-06

Document ID: EDOC1000174085

Views: 115192

Downloads: 19

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next