No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
POE_1.3.6.1.4.1.2011.5.25.195.40.18 hwPoePowerOverUtilizationThresholdResume

POE_1.3.6.1.4.1.2011.5.25.195.40.18 hwPoePowerOverUtilizationThresholdResume

Description

POE/4/PWRUTITHRESHRESUME: OID [oid] PSE resumed from overdrawing power status.(ConsumingPower=[INTEGER])

The power consumption of a PoE-support board is restored to the normal range.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.195.40.18 Warning qualityOfServiceAlarm(3)

Parameters

Name Meaning
OID

Indicates the MIB object ID of the alarm.

ConsumingPower Indicates the power consumption of the board.

Impact on the System

Services are not affected.

Possible Causes

The total PoE power consumption is restored to the normal range.

Procedure

  • This alarm is informational only, and no action is required.
Translation
Download
Updated: 2019-05-06

Document ID: EDOC1000174085

Views: 116563

Downloads: 19

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next