No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Alarm Handling

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
WLAN_1. hwApHotBootRestoreTrap

WLAN_1. hwApHotBootRestoreTrap


WLAN/4/AP_HOT_BOOT_RESTORE_NOTIFY:OID [oid] AP hot boot restore. (APMAC=[OPAQUE], APType=[OCTET], APName=[OCTET], APOccurTime=[OCTET], NotifyName=[OCTET], APID=[INTEGER])

The AP is restored after a hot restart. An alarm is generated after an AP is manually restarted, and goes online and operates properly.


Alarm ID Alarm Severity Alarm Type Warning environmentalAlarm(6)


Name Meaning
OID Indicates the ID of the MIB object.
APMAC Indicates the MAC address of an AP.
APType Indicates the AP type.
APName Indicates the AP name.
APOccurTime Indicates the time when the alarm is generated.
NotifyName Indicates the alarm name.
APID Indicates the AP ID.

Impact on the System

The AP cannot work and its services are interrupted after a manual restart. The AP operates normally when the alarm is triggered.

Possible Causes

The AP goes online again and operates properly after a manual restart.


  1. No action is required.

Related Information


Updated: 2019-05-06

Document ID: EDOC1000174085

Views: 115190

Downloads: 19

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next