No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
PDCLASSOVERCURRENT

PDCLASSOVERCURRENT

Description

HUAWEI POE/PDCLASSOVERCURRENT: PD on the port is over current.(PortIndex=[integer])

The PD connected to the port is in the overcurrent state.

Attribute

Alarm ID Alarm Severity Alarm Type
None None None

Parameters

Name Meaning
None None

Impact on the System

The PD will be automatically powered off.

Possible Causes

The consumed power of the PD increased.

Procedure

  • Remove and reinstall the PD manually.

Related Information

Translation
Download
Updated: 2019-05-06

Document ID: EDOC1000174085

Views: 131112

Downloads: 20

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next