No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Alarm Handling

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
WLAN_1. hwRadioSignalEnvResumeTrap

WLAN_1. hwRadioSignalEnvResumeTrap


WLAN/4/RADIO_ENV_RESUME_NOTIFY:OID [oid] Radio signal environment resumes. (APMAC=[OPAQUE], RadioID=[INTEGER], APName=[OCTET], APID=[INTEGER])

The radio signal environment recovered.


Alarm ID Alarm Severity Alarm Type Warning other(1)


Name Meaning
OID Indicates the ID of the MIB object.
APMAC Indicates the MAC address of an AP.
RadioID Indicates the radio ID.
APName Indicates the AP name.
APID Indicates the AP ID.

Impact on the System


Possible Causes


The channel and power of the radio were changed automatically or manually after the deterioration of the radio signal environment was detected, avoiding the signal interference.


The interference or noise source has been removed to restore the radio environment.


  1. No action is required.
Updated: 2019-05-06

Document ID: EDOC1000174085

Views: 128549

Downloads: 20

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next