Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
WLAN_1.3.6.1.4.1.2011.6.139.13.1.1.40 hwApFmeaPHYFaultTrap
Description
WLAN/4/WINFO_INFO_ID_AP_FMEA_FAULT_PHY_CMOS:OID [oid] AP PHY CMOS fault. (AP MAC=[OPAQUE], AP Name=[STRING], APID=[INTEGER])
The AP's PHY chip fails.
Attribute
| Alarm ID | Alarm Severity | Alarm Type |
|---|---|---|
| 1.3.6.1.4.1.2011.6.139.13.1.1.40 | Warning | equipmentAlarm (5) |
Parameters
| Name | Meaning |
|---|---|
| OID | Indicates the ID of the MIB object. |
| AP MAC | Indicates the MAC address of an AP. |
| AP Name | Indicates the AP name. |
| APID | Indicates the AP ID. |
Procedure
- Check whether services are affected.
- If so, go to Step 2.
- If not, go to Step 4.
- Restart the AP. Then, check whether the alarm persists.
- If so, go to Step 3.
- If not, go to Step 5.
- Replace the faulty AP. Then, check whether the alarm persists.
- If so, go to Step 4.
- If not, go to Step 5.
- Collect alarm messages, log messages, and configurations, and then contact the technical support personnel.
- End.
Previous
