No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
SYSMIB_1.3.6.1.4.1.2011.5.25.19.2.8 hwSysSlaveSwitchSuccessNotification

SYSMIB_1.3.6.1.4.1.2011.5.25.19.2.8 hwSysSlaveSwitchSuccessNotification

Description

SYSMIB/3/SWITCH_SUCCESS:OID [oid] Slave SwitchOver Success.

An active/standby switchover has been performed successfully.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.19.2.8 Warning equipmentAlarm(5)

Parameters

Name Meaning
oid

Indicates the MIB object ID of the alarm.

Impact on the System

Services are not affected.

Possible Causes

A user has run the slave switchover to trigger an active/standby switchover.

Procedure

  1. This message is informational only, and no action is required.

Related Information

None

Translation
Download
Updated: 2019-05-06

Document ID: EDOC1000174085

Views: 130545

Downloads: 20

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next