No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
RSVP_1.3.6.1.4.1.2011.5.25.148.1.12.2.2 hwRsvpTeHelloLostRecovery

RSVP_1.3.6.1.4.1.2011.5.25.148.1.12.2.2 hwRsvpTeHelloLostRecovery

Description

RSVP/2/HWRSVPHELLOLOSTRECOVERY: OID [oid] The RSVP Hello neighbor is resumed. (IpAddress=[ipaddr])

The device is restored from the status of interruption of RSVP neighbor relationship.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.148.1.12.2.2

Major

communicationsAlarm(2)

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

IpAddress

IP address of a neighbor

Impact on the System

Services will not be affected.

Possible Causes

RSVP Hello packets sent from the RSVP neighbor were received.

The RSVP neighbor relationship was deleted.

RSVP was disabled.

Procedure

  • This alarm message is informational only, and no action is required.

Related Information

None.

Translation
Download
Updated: 2019-05-06

Document ID: EDOC1000174085

Views: 130916

Downloads: 20

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next