No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Alarm Handling

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ENTITYTRAP_1. hwRpsPowerInsert

ENTITYTRAP_1. hwRpsPowerInsert


ENTITYTRAP/4/RPSPOWERINSERT: OID [oid] RPS Power has been inserted.(Index=[INTEGER], EntityPhysicalIndex=[INTEGER],PhysicalName="[OCTET]", EntityTrapFaultID=[INTEGER])

An RPS power supply has been connected to the device.


Only the AR2201-48FE-S, AR2204-S, and AR2204-27GE-S support alarms about the RPS power supply.


Alarm ID Alarm Severity Alarm Type

Warning equipmentAlarm (5)


Name Meaning

Indicates the MIB object ID of the alarm.

Index Indicates the entity index.
EntityPhysicalIndex Indicates the physical entity index.
PhysicalName Indicates the physical entity name.
EntityTrapFaultID Indicates the error code.

Impact on the System


Possible Causes

An RPS power supply has been connected to the device.


  1. This alarm is informational only, and no action is required.
Updated: 2019-05-06

Document ID: EDOC1000174085

Views: 128645

Downloads: 20

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next