No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
L2V_1.3.6.1.4.1.2011.5.25.119.4.1.2.2 hwPWVcSwitchPtoW

L2V_1.3.6.1.4.1.2011.5.25.119.4.1.2.2 hwPWVcSwitchPtoW

Description

L2V/4/PWE3VC_P2W_T:OID [oid] The status of the PWE3 VC turned working from protecting. (VcId=[GAUGE], VcType=[INTEGER], CtrlWord=[INTEGER], PrimaryPwId=[GAUGE], HWL2VpnStateChangeReason=[INTEGER], InterfaceName=[STRING])

Indicates that a PW changes from the secondary state to the primary state.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.119.4.1.2.2

Warning

other(1)

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

VcId

Indicates the ID of a VC.

VcType

Indicates the type of a VC:
  • 0: Initial value
  • 1: FR
  • 2: ATM AAL5
  • 3: ATM cell relay
  • 4: VLAN
  • 5: Ethernet
  • 6: HDLC
  • 7: PPP
  • 9: ATM cell VCC
  • 10: ATM cell VPC
  • 11: IP-layer 2 (used for heterogeneous IP-interworking between Huawei devices and non-Huawei devices)
  • 12: ATM, 1-to-1 VCC cell mode
  • 13: ATM, 1-to-1 VPC cell mode
  • 14: ATM, AAL5 PDU VCC TRANSPORT
  • 64: Heterogeneous IP-interworking

CtrlWord

Indicates whether the control word is enabled:
  • 1: enabled
  • 2: disabled

PrimaryPwId

Indicates the remote CE ID of the VC in the Working state.

HWL2VpnStateChangeReason

Indicates the cause for the VC status change. For details, refer to hwPwStateChangeReason in the appendix of HUAWEI-PWE3-MIB.

InterfaceName

Indicates the interface name.

Impact on the System

Packet loss in millisecond may occur in the switching process. The packet loss, however, affects little to the PWE3 service.

Possible Causes

The primary PW is rectified, and the VLL service is switched from the secondary PW to the primary PW.

Procedure

  1. This trap message is informational only, and no action is required.
Translation
Download
Updated: 2019-05-06

Document ID: EDOC1000174085

Views: 117591

Downloads: 19

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next