No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


MIB Reference

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).


This table configures drop profiles.

The indexes of this table are hwCBQoSBehaviorIndex.


Object Name



Max Access

Implemented Specifications



This object indicates the drop profile index. The value ranges from 1 to 63.


This object is implemented as defined in the corresponding MIB files.


Octet String

This object indicates the drop profile name. The value is a string of 1 to 31 ASCII characters without spaces.

Default value: none.

Spaces at the beginning or end of the string will be ignored.


This object is implemented as defined in the corresponding MIB files.



This object indicates the drop type:

  • 0: WRED based on IP precedences
  • 1: WRED based on DSCP priorities

The default value is 0.


This object is implemented as defined in the corresponding MIB files.



This object indicates the row status:

  • 1; active
  • 4: createandgo
  • 6: destroy

Default value: none.


This object is implemented as defined in the corresponding MIB files.

Creation Restriction

A maximum of 64 drop profiles are supported, including a default drop profile. Therefore, you can configure a maximum of 63 drop profiles.

hwCBQoSDropProfileName must be configured and its value must be unique; otherwise, an error message is displayed.

To create a row, set hwCBQoSDropProfileRowStatus to createAndGo(4). A row cannot be created by using createAndWait(5).

Modification Restriction

hwCBQoSWredClassCfgInfoEntry is created when hwCBQoSDropProfileCfgInfoTable is created. It specifies the parameters of each traffic classifier. Traffic classifiers vary according to WRED type. When WRED type is changed, the original traffic classifiers will be deleted automatically.

Deletion Restriction

To delete a drop profile, delete all the rows whose hwCBQoSWredDropProfileIndex values are hwCBQoSDropProfileIndex in hwCBQoSWredCfgInfoTable.

Access Restriction

The entries in this table can be read without restriction.

Updated: 2019-07-19

Document ID: EDOC1000174090

Views: 451994

Downloads: 48

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next