No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
hwDccTable

hwDccTable

This table describes the dial control center (DCC) interface.

The index of this table is hwDccEntry.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.244.1.1.1.1

hwDccIfIndex

ULONG

Not-accessible

This object indicates the DCC-enabled interface index.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.244.1.1.1.2

hwCircular

UCHAR

Read-only

This object indicates the DCC type of a DCC-enabled interface:
  • 1: circular DCC
  • 2: resource-shared DCC

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.244.1.1.1.3

hwIdleTime

ULONG

Read-only

This object indicates the allowed link idle time. This value ranges from 5 to 65535, in seconds.

The default value is 120 seconds.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.244.1.1.1.4

hwDialUser

UCHAR

Read-only

This object indicates the resource-shared DCC.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.244.1.1.1.5

hwDialGroup

ULONG

Read-only

This object indicates the dialer access group number for an interface. The dialer access group number is set by the dialer-group command.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.244.1.1.1.6

hwDialBundle

ULONG

Read-only

This object indicates the dialer bundle number for a dialer interface working in resource-shared DCC mode. The value ranges from 1 to 255.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.244.1.1.1.7

hwDialNumber

ULONG

Read-only

This object indicates the dialer number used to call the remote end. Only the dialer numbers configured by the dialer number dial-number command are displayed.

The value is a string of 1 to 30 characters.

By default, no dialer number is configured.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.244.1.1.1.8

hwDialBundleMem

ULONG

Read-only

This object indicates the dialer bundle number. The value ranges from 1 to 255.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.244.1.1.1.9

hwDialCirGroup

ULONG

Read-only

This object indicates the dialer circular group number of a physical interface.

By default, the value is -1, indicating that a physical interface does not belong to any dialer interface.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

None.

Modification Restriction

None.

Deletion Restriction

None.

Access Restriction

None.

Translation
Download
Updated: 2019-07-19

Document ID: EDOC1000174090

Views: 509509

Downloads: 49

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next