No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
hwIPSecTunnelStart

hwIPSecTunnelStart

OID

Object Name

Binding Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.122.26.6.1

hwIPSecTunnelStart

  • hwIPSecIfIndex: indicates the index of the device interface on one end of an IPSec tunnel.
  • hwIPSecTunnelPolicyNum: indicates the number of the security policy applied to an IPSec tunnel.
  • hwIPSecTunnelIndex: indicates the index of an IPSec tunnel. The index uniquely identifies the IPSec tunnel.
  • hwIPSecTunnelRuleId: indicates the ID of an ACL rule referenced by an IPSec policy.
  • hwIPSecTunnelDstIP: indicates the peer IP address of an IPSec tunnel.
  • hwIPSecTunnelInsideIP: indicates the intranet IP address assigned to the peer during remote access.
  • hwIPSecTunnelRemotePort: indicates the peer port number of an IPSec tunnel.
  • hwIPSecTunnelCpuID: indicates the ID of the CPU that processes IPSec tunnel packets.
  • hwIPSecTunnelSrcIP: indicates the local IP address of an IPSec tunnel.
  • hwIPSecTunnelLifeSize: indicates the lifetime of an IPSec tunnel, in kilobytes.
  • hwIPSecTunnelLifeTime: indicates the lifetime of an IPSec tunnel measured by time.
  • hwIPSecVsysName: indicates the name of the virtual system to which the IPSec tunnel belongs.
  • hwIPSecTrapIfName: indicates the name of the device interface on one end of an IPSec tunnel.
  • hwIPSecTunnelSlotID: indicates the ID of the Slot that processes IPSec tunnel packets.

An IPSec tunnel is created.

This object is implemented as defined in the corresponding MIB file.

Translation
Download
Updated: 2019-07-19

Document ID: EDOC1000174090

Views: 513463

Downloads: 49

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next